LiftMaster openers
Raised-panel steel
Carriage house
Modern flush
Full-view glass
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateLiftMaster Torsion Spring Replacement: The Las Vegas Owner’s Guide
We stock torsion springs sized for LiftMaster residential doors and typically complete a replacement in Las Vegas for $180 – $340 installed, including the part, labor, and a written 365-day warranty. Most jobs are done same day, often within a few hours of your call. You’ll usually know the spring has failed because you’ll hear a loud bang from the garage, the door won’t lift more than a few inches, and the opener motor strains against a weight it can no longer move.
That bang is the sound of a torsion spring, the coiled steel shaft mounted horizontally above your door, snapping under tension. LiftMaster doors typically use either a single spring setup or a pair, depending on door weight and width. When one side of a pair breaks, the remaining spring gets overloaded and wears fast. That’s why we always recommend replacing both springs at once, even if only one has snapped. They cycle, wear, and fatigue as a matched set.
Which LiftMaster Models This Applies To
Most LiftMaster residential doors from the last 25 years use standard torsion spring hardware, regardless of whether the opener is a chain drive, belt drive, or wall mount. The spring itself is rarely LiftMaster branded. What matters is the door’s characteristics: width, height, weight, and cable drum setup. We match springs to those measurements, not to a model number on the opener motor.
Here’s the compatibility gotcha most owners run into. Openers are rated in horsepower and communicate with the door, but the spring does the actual lifting. A door that has been retrofitted, whether it now carries an insulation kit, a heavier panel, or a different seal, may need a different wire size or spring length than the original install called for. That’s why we measure door weight with a scale, not a guess. If you’ve added insulation or changed the door material since the original install, tell us. The spring spec changes with it.
On the OEM question: LiftMaster and Chamberlain, which sit under the same parent company, source springs from regional hardware suppliers. This means a quality aftermarket spring, matched to the right wire gauge, inside diameter, and coil count, performs identically to the original. We stock name brand springs from the same suppliers used by major door manufacturers, and we back them with the same 365-day guarantee. The part in the box isn’t where failures happen. Failures come from mismatched specs, skipped lubrication, or worn cables transferring uneven load onto the spring.
Styles & brands we work with






Signs Your LiftMaster Torsion Spring Replacement Is Failing
- A bang from the garage, then a door that won’t budge. A torsion spring under full tension releases all at once when the coil finally fractures. The sound is unmistakable. The door will feel like it weighs three times what it should, because it now does.
- The door opens a foot and stops, with the opener straining. If one spring in a pair has broken, the remaining spring can still pick up about half the door. The opener’s force setting maxes out, and the door stalls mid-travel.
- A visible gap in the coil. Look directly above the closed door at the spring assembly. A broken spring shows a clean separation gap between coils, usually in one or two places. A healthy spring is one continuous coil from end to end.
- The door is heavy when you release the opener and lift manually. Pull the red release cord and try to lift the door by hand. A properly sprung door should feel like lifting about 20 pounds. If it takes real effort, the spring has lost tension or is close to failing.
- The cables have slack or the door sits crooked in the opening. When a spring breaks, the lift cables often unwind from the drums, leaving loose cable visible near the bottom corners. You may also notice the door hanging unevenly, with one side sitting noticeably lower.
Replacement Cost & What’s Included
Torsion spring replacement in Las Vegas runs $180 – $340 installed, depending on whether you have a single spring or a pair, the door’s weight class, and the spring cycle rating you choose. That price includes the springs, all hardware adjustment, lubrication of the full torsion assembly, and a written 365-day guarantee. We write the total price down before any work starts, and that number doesn’t change once we’re on site.
| Service | Typical Range |
|---|---|
| Single torsion spring replacement | $180 – $240 |
| Pair of torsion springs (recommended) | $220 – $340 |
| High-cycle spring upgrade (adds lifespan) | +$30 – $60 per spring |
We also stock higher cycle rated springs for Las Vegas garages that see heavy daily use or extreme heat cycles. The standard spring lasts roughly 10,000 to 15,000 cycles, which is about 7 to 10 years for a typical Las Vegas household. The heat in places like Summerlin and Henderson shortens that modestly, because the steel expands and contracts more across our day-night temperature swings. If you park in and out multiple times daily, a high cycle spring is worth the modest premium. Aaron Teague still reviews spring specs personally on complex jobs, and he’ll tell you straight whether a standard or high cycle spring makes sense for your door.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do two things before calling us: visually confirm the spring is broken by looking at the coil above the closed door, and release the opener to feel whether the door is heavier than it should be. Those checks tell you what’s wrong and help you describe the problem accurately when you call.
What you should not do is attempt to replace a torsion spring yourself. These springs hold hundreds of pounds of stored rotational force. The winding bars, the torsion tube, and the cable drums are under enough tension to cause severe injury if the spring slips or the hardware fails mid-wind. This isn’t a cautious suggestion, it’s a hard line. The tools look simple. The forces aren’t. A trained technician uses specific winding procedures, counts turns precisely, and checks cable seating before tensioning. One wrong move with a winding bar and a slipped spring can break a wrist or worse. Call us at (725) 224-5155. We’ll send a technician who does this daily.
FAQs
A standard torsion spring lasts roughly 7 to 10 years in Las Vegas, equivalent to about 10,000 to 15,000 open-close cycles. Our desert heat shortens the lifespan slightly compared to coastal climates because the steel expands and contracts across wider daily temperature swings. High-cycle springs rated for 25,000+ cycles are available for doors that see frequent daily use. Call (725) 224-5155 and we’ll tell you what’s currently on your door and what makes sense to put back.
No. A torsion spring that has snapped cannot be welded or spliced. The failure happens at the molecular level from metal fatigue accumulated across thousands of cycles. The only fix is a new spring, properly spec’d and properly wound. We carry the common sizes on our trucks and can usually complete the job in one visit. Call (725) 224-5155 and we’ll confirm we have your size before we head out.
Most torsion spring replacements take 45 to 90 minutes from start to finish, including removing the old springs, installing and winding the new ones, adjusting cable tension, and lubricating the assembly. We also test the door through a full open-close cycle and adjust the opener’s force settings while we’re there. You’ll get a written price before we begin, and the job is done the same day in nearly all cases.
We stock the most common residential torsion spring wire gauges and lengths on our service trucks, so most Las Vegas homes get same-day replacement without a return trip. We also carry Chamberlain and Genie compatible springs, since those brands use the same supply chain and hardware families. If your door has an unusual weight or a custom setup, we’ll pull measurements, quote you a price, and return with the right spring, usually within 24 hours.
Call Doyle Garage Doors Las Vegas for Your LiftMaster Spring Replacement
You’ll know exactly what’s wrong, what it costs, and who’s coming to fix it before we ever pull into your driveway. We’ve been doing this in Las Vegas since 2001, and every technician we send is background-checked, identity-verified, and photographed. You’ll get a name and a face before the visit. A live person answers our phones 24 hours a day, seven days a week, including weekends and holidays. The price gets written down before work starts, and the repair carries a written 365-day guarantee. If the spring fails within a year, we come back and make it right at no charge. Call (725) 224-5155 for a free estimate, day or night.
Written by Aaron Teague, Owner, Doyle Garage Doors Las Vegas at Doyle Garage Doors Las Vegas, serving Las Vegas and nearby areas.